Your Present Position:Products > Roller Sublimation Machine > Oil Drum Multifunctional Roller Sublimation Machine XY-BC420(Standard)
Oil Drum Multifunctional Roller Sublimation Machine XY-BC420(Standard)
[Descriptions]

Model No.:XY-BC420(Standard)
Printing Width:

1200MM,1700MM,1900MM,2100MM 

[Feature]
※  Internal Seated Oil Box
※  Carbon Brush Conduct Ring and Electromagnetic Loop
※  150A Single Phase Solid Relay
※  Intelligent Temperature Control


[Color]

      (Accept OEM color)





  Can be sublimated logo or type, solvent type ink, high temperature and pressure, and a certain amount of time, heat transfer printedhemp, chemical fiber and other material.Consistent temperature,without any color error even in continuous transfer printing,thus to get a clear printing effect.



The machine is packed in wooden package and provide with manual.

 

① Check that all screws in mainframe are loose or not, tighten if loose
②The whole machine should be set at level with enough capacity; wood frame to overhead the sliding wheel and level direction is preferred.
③Matched load leakage circuit breaker separately on this machine with 3×6×6+1×4×4 international power wire. The crust of machine must be earthing separately.
④Keep the equipment in level while installation. Use two section 160×160×700(length) of bed timber under inner side of two wheel. Use level instrument to check if the machine is level or not.
When the working table is installed, the height must be consistent with feeding blanket and level. The paper feeding (put in) shaft and cloth feeding (put in) shaft must be of the same level with heating tank.


Office Address: Room #1423-1425, Minjie Kechuang Center Building No.#1, Private Science-Tech Park, Baiyun District, Guangzhou.

Factory Address:Longhe Road  ,Dagangling Village ,Zhongluotan Town,Baiyun District ,Guangzhou, China

+86-020-28072609

+86-20-37421360



E-mail: sales@bysublimation.com 
E-mail: gzxy51899@126.com

Fields marked with * are required
Sale Team
Kenfor Lighting86 job86 trade86 wanggou86